Standard Drills

MPK catalog

The guide to solving drilling processes offers a range of suggestions for problems that can be encountered in the drilling process of printed circuits boards

The MU42S type drill with steel shank and special design of the undercut and semi-mono-helix. They are available from 0.10 mm to 0.45 mm in diameter. They are particularly suitable for filled materials. The number of perforated panels or the tool life can be increased.

The UX42 type drills are drills with hard metal helix and steel shaft with a diameter of 3.175 mm. The helix is of the udercut type and with a helical angle of 42 degrees. They are available from a diameter of 0.15 to 0.5 mm. They are particularly suitable for drilling multilayers with filled material and with high Tg, They are distinguished by good chip removal, a very low breakage percentage and very low deviation values.

The UX30 type drills are drills with hard metal helix and steel shank with a diameter of 3.175 mm. The helix is of udercut type and with a helical angle of 30 degrees. They are available from 0.85 to 2.00 mm in diameter. They are particularly suitable for drilling multilayers with high Tg. They are distinguished by a very low breakage percentage and by very low deviation values.

The SX35 type drills are drills with hard metal helix and steel shank with a diameter of 3.175 mm. The helix is of the standard type and with a helical angle of 35 degrees. They are available from 0.10 to 0.80 mm in diameter. They are particularly suitable for drilling multilayers with high Tg, they are distinguished by a very low breakage percentage and by very low deviation values

The SD-type drills are drills made entirely of solid carbide with a shank diameter of 3,175 mm. They are available from a diameter of 3.00 to 6.50. They are suitable for standard PCBs

The LD LX type drills are drills for slots, available from a diameter of 0.50 to 2.00 mm

SP30C drills are drills for blind hole drilling and available in six diameters. The helicoid is conical in shape.