PCB MACHINING SOLUTIONS
Standard routers for PCB contours and slots
Dedicated carbide geometries for external profiles, slots and cut-outs, selected from material, direction of cut and finish requirements.
Selection starts with the process
Application
Material, stack, geometry and the required result define the starting point.
Tool and machine
Diameter, spindle, collet and operating conditions must be assessed together.
Quality objective
Hole, edge, dimensional tolerance and tool life guide the final choice.
Information for a technical assessment
- PCB material and stack
- Diameter, depth and geometry
- Machine, spindle and collet
- Speed, feed and production volume
- Current defect or quality objective
Related solutions
← Back to ProductsVerified technical documentation
DA30-R / DA20-R / CA20-R
Open document →EA30-R
Open document →ECA30-R
Open document →EAC30-R
Open document →SC30-R
Open document →MPK Product Catalogue 2022
Open document →Routing troubleshooting
Open document →From the build-up to the right tool
Enter layers, thickness, copper and material: the tool selector takes you to the MPK article to order and checks that the flute length covers your stack.
Open the tool selectorWould you like to optimise your process?
Describe material, machine, dimensions and the result required. The assistant collects the initial data and prepares the request for the Global Technology team.
Contact the teamRange
| Model | Ø (mm) | Flute | Shank | Typical application |
|---|---|---|---|---|
| DA30-R | 0.60–3.175 | 30° | Ø 3.175 mm | Hard PCB materials |
| DA20-R | 1.20–2.40 | 20° | Ø 3.175 mm | Hard PCB materials and higher feed rates |
| CA20-R | 0.60–3.175 | 20° | Ø 3.175 mm | Hard and soft PCB materials |
| EA30-R | 0.30–3.175 | 30° | Ø 3.175 mm | Soft PCB materials and dimensional accuracy |
| ECA30-R | 0.80–3.00 | 30° | Ø 3.175 mm | Aluminium |
| EAC30-R | 0.80–3.00 | 30° | Ø 3.175 mm | Aluminium and wear resistance |
| SC30-R | 0.80–3.00 | 30° | Ø 3.175 mm | Rigid or flexible PCBs and plastics |